❏ 站外平台:

History(历史)命令用法 15 例

| 2013-04-07 20:51   收藏: 3 分享: 2    

如果你经常使用 Linux 命令行,那么使用 history(历史)命令可以有效地提升你的效率。本文将通过实例的方式向你介绍 history 命令的 15 个用法。

1、使用 HISTTIMEFORMAT 显示时间戳

当你从命令行执行 history 命令后,通常只会显示已执行命令的序号和命令本身。如果你想要查看命令历史的时间戳,那么可以执行:

# export HISTTIMEFORMAT='%F %T '
# history | more
1  2008-08-05 19:02:39 service network restart
2  2008-08-05 19:02:39 exit
3  2008-08-05 19:02:39 id
4  2008-08-05 19:02:39 cat /etc/redhat-release

注意:这个功能只能用在当 HISTTIMEFORMAT 这个环境变量被设置之后,之后的那些新执行的 bash 命令才会被打上正确的时间戳。在此之前的所有命令,都将会显示成设置 HISTTIMEFORMAT 变量的时间。[感谢 NightOwl 读者补充]

2、使用 Ctrl+R 搜索历史

Ctrl+R 是我经常使用的一个快捷键。此快捷键让你对命令历史进行搜索,对于想要重复执行某个命令的时候非常有用。当找到命令后,通常再按回车键就可以执行该命令。如果想对找到的命令进行调整后再执行,则可以按一下左或右方向键。

# [Press Ctrl+R from the command prompt, which will display the reverse-i-search prompt]
(reverse-i-search)`red‘: cat /etc/redhat-release
[Note: Press enter when you see your command, which will execute the command from the history]
# cat /etc/redhat-release
Fedora release 9 (Sulphur)

3、快速重复执行上一条命令

有 4 种方法可以重复执行上一条命令:

  1. 使用上方向键,并回车执行。
  2. 按 !! 并回车执行。
  3. 输入 !-1 并回车执行。
  4. 按 Ctrl+P 并回车执行。

4、从命令历史中执行一个指定的命令

在下面的例子中,如果你想重复执行第 4 条命令,那么可以执行 !4:

# history | more
1  service network restart
2  exit
3  id
4  cat /etc/redhat-release
# !4
cat /etc/redhat-release
Fedora release 9 (Sulphur)

5、通过指定关键字来执行以前的命令

在下面的例子,输入 !ps 并回车,将执行以 ps 打头的命令:

# !ps
ps aux | grep yp
root     16947  0.0  0.1  36516  1264 ?        Sl   13:10   0:00 ypbind
root     17503  0.0  0.0   4124   740 pts/0    S+   19:19   0:00 grep yp

6、使用 HISTSIZE 控制历史命令记录的总行数

将下面两行内容追加到 .bash_profile 文件并重新登录 bash shell,命令历史的记录数将变成 450 条:

# vi ~/.bash_profile
HISTSIZE=450
HISTFILESIZE=450

7、使用 HISTFILE 更改历史文件名称

默认情况下,命令历史存储在 ~/.bashhistory 文件中。添加下列内容到 .bashprofile 文件并重新登录 bash shell,将使用 .commandline_warrior 来存储命令历史:

# vi ~/.bash_profile
HISTFILE=/root/.commandline_warrior

8、使用 HISTCONTROL 从命令历史中剔除连续重复的条目

在下面的例子中,pwd 命令被连续执行了三次。执行 history 后你会看到三条重复的条目。要剔除这些重复的条目,你可以将 HISTCONTROL 设置为 ignoredups:

# pwd
# pwd
# pwd
# history | tail -4
44  pwd
45  pwd
46  pwd [Note that there are three pwd commands in history, after executing pwd 3 times as shown above]
47  history | tail -4
# export HISTCONTROL=ignoredups
# pwd
# pwd
# pwd
# history | tail -3
56  export HISTCONTROL=ignoredups
57  pwd [Note that there is only one pwd command in the history, even after executing pwd 3 times as shown above]
58  history | tail -4

9、使用 HISTCONTROL 清除整个命令历史中的重复条目

上例中的 ignoredups 只能剔除连续的重复条目。要清除整个命令历史中的重复条目,可以将 HISTCONTROL 设置成 erasedups:

# export HISTCONTROL=erasedups
# pwd
# service httpd stop
# history | tail -3
38  pwd
39  service httpd stop
40  history | tail -3
# ls -ltr
# service httpd stop
# history | tail -6
35  export HISTCONTROL=erasedups
36  pwd
37  history | tail -3
38  ls -ltr
39  service httpd stop
[Note that the previous service httpd stop after pwd got erased]
40  history | tail -6

10、使用 HISTCONTROL 强制 history 不记住特定的命令

将 HISTCONTROL 设置为 ignorespace,并在不想被记住的命令前面输入一个空格:

# export HISTCONTROL=ignorespace
# ls -ltr
# pwd
#  service httpd stop [Note that there is a space at the beginning of service, to ignore this command from history]
# history | tail -3
67  ls -ltr
68  pwd
69  history | tail -3

11、使用 -c 选项清除所有的命令历史

如果你想清除所有的命令历史,可以执行:

# history -c

12、命令替换

在下面的例子里,!!:$ 将为当前的命令获得上一条命令的参数:

# ls anaconda-ks.cfg
anaconda-ks.cfg
# vi !!:$
vi anaconda-ks.cfg

补充:使用 !$ 可以达到同样的效果,而且更简单。[感谢 wanzigunzi 读者补充]

下例中,!^ 从上一条命令获得第一项参数:

# cp anaconda-ks.cfg anaconda-ks.cfg.bak
anaconda-ks.cfg
# vi -5 !^
vi anaconda-ks.cfg

13、为特定的命令替换指定的参数

在下面的例子,!cp:2 从命令历史中搜索以 cp 开头的命令,并获取它的第二项参数:

# cp ~/longname.txt /really/a/very/long/path/long-filename.txt
# ls -l !cp:2
ls -l /really/a/very/long/path/long-filename.txt

下例里,!cp:$ 获取 cp 命令的最后一项参数:

# ls -l !cp:$
ls -l /really/a/very/long/path/long-filename.txt 

14、使用 HISTSIZE 禁用 history

如果你想禁用 history,可以将 HISTSIZE 设置为 0:

# export HISTSIZE=0
# history
# [Note that history did not display anything]

15、使用 HISTIGNORE 忽略历史中的特定命令

下面的例子,将忽略 pwd、ls、ls -ltr 等命令:

# export HISTIGNORE=”pwd:ls:ls -ltr:”
# pwd
# ls
# ls -ltr
# service httpd stop
# history | tail -3
79  export HISTIGNORE=”pwd:ls:ls -ltr:”
80  service httpd stop
81  history
[Note that history did not record pwd, ls and ls -ltr]

[via The Geek Stuff

VIA http://linuxtoy.org/archives/history-command-usage-examples.html



最新评论


返回顶部

分享到微信

打开微信,点击顶部的“╋”,
使用“扫一扫”将网页分享至微信。